We celebrate the Sellec, the Little League Coach, the Handlebar, and more. Get DB Disguise Free this week (May 1-6).
Happy stache everyone!
Fonts used in Mustache image:
Tuesday, May 1, 2012
Cinco De Mustache
A day when men and brawny womenshow their manliness.
We celebrate the Sellec, the Little League Coach, the Handlebar, and more. Get DB Disguise Free this week (May 1-6).
Happy stache everyone!
We celebrate the Sellec, the Little League Coach, the Handlebar, and more. Get DB Disguise Free this week (May 1-6).
Happy stache everyone!
Monday, April 30, 2012
Howdy Serif!
You're a self-professed fontaholic. You don't know why, but you just love fun fonts! You didn't go to school to study typography but you know you have developed your own sense of font categories and families. Does this sound like you?
A serif font is font who's letters have little tails on them. A typeface with serifs are called serif fonts. One without the little tails is called a sans-serif font from the French word "sans", meaning "without".
Studies show that serif typefaces are easier on the eyes for reading in print, especially when used on cheaper papers like newsprint. However the low screen resolutions on computers make a sans-serif typeface easier to read on monitors.
I actually DID go to school and study typography but that still doesn't change the fact that when I see fonts I still categorize them in my special families and categories... like "fun and whimsical" or "old west" or "futuristic space". My naming conventions aren't very original but it gets the job done.
One thing I did learn in school was the difference between two very important font categories and that stays with me today. Those categories are serif and sans serif.
A serif font is font who's letters have little tails on them. A typeface with serifs are called serif fonts. One without the little tails is called a sans-serif font from the French word "sans", meaning "without".
Studies show that serif typefaces are easier on the eyes for reading in print, especially when used on cheaper papers like newsprint. However the low screen resolutions on computers make a sans-serif typeface easier to read on monitors.
Friday, February 10, 2012
Get your free sentiment page, just in time for last-minute valentines! Then show off your stuff and post your projects in the SNF Idea Gallery. Download in your choice of:Sign up for the ScrapNfonts newsletter for more free downloads.
Thursday, February 9, 2012
Valentine's Day is less than three weeks away. More than any other holiday, Valentine's day is the holiday of words. It's time to express your affection in notes, cards, or spoken word. This year let ScrapNfonts fonts do some of the talking! Here are three creative ways to spread those words of love in stunning cards:
1. For the Love of Fonts: use a lot of fonts in short words or phrases.
For this card I found how to spell "love" in a bunch of languages. You could also use adjectives to describe your loved one in a card like this.
I picked a different font for each language (SNF has a lot of fonts with international characters, all the Premium Fonts and many Standard Fonts), and puzzled them together on a card. I liked how it looked with boxes around each word, but it can be done collage style, too, without the boxes. If you have certain words that are more important than others, make them larger (like I did with "LOVE"). Tip: to fill in holes, add DoodleBats.
To see all the fonts I used in this card, go here.
2. Take fonts to the heart: Type your fonts within a shape or larger letters with the help of Photoshop.
Last Spring, Brian Tippetts gave us another example of this fun way to use fonts, and he included two free Photoshop template downloads to help you.
If you're using Photoshop, it's not hard to create this look on your own! I use Photoshop CS3, but the method is the same for a lot of versions of Photoshop.
First, Type the letters or DoodleBat you want. Pick a thick, simple font (like LD Mon Cherie or LD Modern Slab), or a solid simple DoodleBat image, and scale it BIG. I used the number 0 in DB Sweet Spring for the butterfly below.
Notice the layers window shows my butterfly as a text layer. For the next step, while your text layer is selected, go to the top menu bar for Layer > Type > Convert to Shape. When you click that, your layers window will look like this:
And your DoodleBat/letter will have a line around it, meaning it's selected and it's changed into a shape.
If your shape does not have a line around it, look at your layers window. The layer with the shape should have two parts, the first is a colored square and the second is a square with your shape in it. There is a little chain link between the two.
The shape square should have a double line around it. If it does, you're good for the next step. If it doesn't, click the shape square once and that should select the shape. It is important for the shape to be selected for the next step.
Next we select our type tool. Hover the cursor over your selected shape and the cursor should look different. It should have a dotted circle around it.
Make sure not to hover the cursor on the edge of the shape or you'll get a different cursor with a diagonal line through it. This cursor will allow you to type on the outside edge of your shape, which is a good tool, but not what we're trying to do here. Here are the two different cursors.
We want the cursor pictured on the left. Click the mouse when you see this cursor, and you can start typing in your shape. Make sure to make your font size smaller and use a font that looks good inside your shape. You may have to play with font size and paragraph alignment to get a look you like. For this card, I used LD Jambalaya.
Notice you now have a shape layer and a text layer. If you want to make your shape layer invisible, just click on the little eye next to the layer in the Layers window. The text layer will still type in your shape.
Finally, fit it into your layout, and you're done! Easier than you thought, eh? And totally cool.
3. Build a foundation of Love: Use blocks of text as a background element.
My husband and I have always loved the song "I Will" by the Beatles. By layering the words to that song subtly in the background of this card using LD Abe Lincoln, it introduces another layer of sentiment. The bird is from DB Sweet Spring and the brown font is LD Remington Portable.
This example uses a block of text as the ground layer for the eskimos. It's not the primary focus, but another fun way to add text and sentiment. The text is LD Advertise This and the eskimos are from DB Eskimo Kisses.
I hope you can use these ideas to make awesome Valentine's Day cards and future projects! Happy Fonting!
Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.
1. For the Love of Fonts: use a lot of fonts in short words or phrases.
For this card I found how to spell "love" in a bunch of languages. You could also use adjectives to describe your loved one in a card like this.I picked a different font for each language (SNF has a lot of fonts with international characters, all the Premium Fonts and many Standard Fonts), and puzzled them together on a card. I liked how it looked with boxes around each word, but it can be done collage style, too, without the boxes. If you have certain words that are more important than others, make them larger (like I did with "LOVE"). Tip: to fill in holes, add DoodleBats.
To see all the fonts I used in this card, go here.
2. Take fonts to the heart: Type your fonts within a shape or larger letters with the help of Photoshop.
Last Spring, Brian Tippetts gave us another example of this fun way to use fonts, and he included two free Photoshop template downloads to help you.If you're using Photoshop, it's not hard to create this look on your own! I use Photoshop CS3, but the method is the same for a lot of versions of Photoshop.
First, Type the letters or DoodleBat you want. Pick a thick, simple font (like LD Mon Cherie or LD Modern Slab), or a solid simple DoodleBat image, and scale it BIG. I used the number 0 in DB Sweet Spring for the butterfly below.
Notice the layers window shows my butterfly as a text layer. For the next step, while your text layer is selected, go to the top menu bar for Layer > Type > Convert to Shape. When you click that, your layers window will look like this:
And your DoodleBat/letter will have a line around it, meaning it's selected and it's changed into a shape.If your shape does not have a line around it, look at your layers window. The layer with the shape should have two parts, the first is a colored square and the second is a square with your shape in it. There is a little chain link between the two.
The shape square should have a double line around it. If it does, you're good for the next step. If it doesn't, click the shape square once and that should select the shape. It is important for the shape to be selected for the next step.Next we select our type tool. Hover the cursor over your selected shape and the cursor should look different. It should have a dotted circle around it.
Make sure not to hover the cursor on the edge of the shape or you'll get a different cursor with a diagonal line through it. This cursor will allow you to type on the outside edge of your shape, which is a good tool, but not what we're trying to do here. Here are the two different cursors.
We want the cursor pictured on the left. Click the mouse when you see this cursor, and you can start typing in your shape. Make sure to make your font size smaller and use a font that looks good inside your shape. You may have to play with font size and paragraph alignment to get a look you like. For this card, I used LD Jambalaya.
Notice you now have a shape layer and a text layer. If you want to make your shape layer invisible, just click on the little eye next to the layer in the Layers window. The text layer will still type in your shape.
Finally, fit it into your layout, and you're done! Easier than you thought, eh? And totally cool.
3. Build a foundation of Love: Use blocks of text as a background element.
My husband and I have always loved the song "I Will" by the Beatles. By layering the words to that song subtly in the background of this card using LD Abe Lincoln, it introduces another layer of sentiment. The bird is from DB Sweet Spring and the brown font is LD Remington Portable.
This example uses a block of text as the ground layer for the eskimos. It's not the primary focus, but another fun way to add text and sentiment. The text is LD Advertise This and the eskimos are from DB Eskimo Kisses.I hope you can use these ideas to make awesome Valentine's Day cards and future projects! Happy Fonting!
Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.
Sunday, October 30, 2011
Sure, plastic toys on top of cupcakes are fun, albeit a potential choking hazard, but how much more fun is a cupcake when everything is edible? Way more fun.
These Creepcakes are surprisingly easy with the help of some DoodleBats from ScrapNfonts and some chocolate. Yumm.
Here's what you need to get started: Wax paper, chocolate chips (or better yet, chocolate almond bark if you have it), a ziplock baggie, and a printout of DoodleBats.
In selecting DoodleBats for your printout, make sure you pick images that are solid black with no separate parts. Scale them big enough so they're about two inches tall when printed out. DoodleBats with a lot of good images are DB Boo Ya and DB Haunted House. I also used DB Vintage Halloween.
You can also use any of the Jack-o-Pattern DoodleBats if you remember to use the negative of the image as your template. It helps me to draw a circle around the outside of the image, then I use the white shape as my guide.
I used chocolate chips, but on a hot day the chocolate may not set firmly. Chocolate almond bark would probably work better.
Melt the chocolate. I just did mine in the microwave for 20-30 second intervals, stirring in between just until it was smooth. You don't need very much chocolate, I used about half a cup and had extra. A little goes a long way.
Spoon the melted chocolate into the corner of the ziplock baggie. Try to gently deflate some of the air out of the back before you zip it shut.
Take a sheet of wax paper and lay it over your DoodleBat printout. You should be able to see the DoodleBats underneath it. Now carefully snip a tiny piece of the corner off of the ziplock baggie. If it seems too small a hole, you can always cut more. Hold the baggie like a frosting piping bag, and carefully trace the DoodleBat images in chocolate.
I always like to outline the edges first, then fill them in with chocolate.
Make sure the images you are making in chocolate are thick enough to stand on their own. I went over some of my more fragile looking chocolate lines twice just to make sure they were thick enough.
I really liked the skulls, the spider web, and that funky spooky tree, so I made multiple copies of them by shifting my DoodleBat printout underneath the wax paper.
Make more copies than you think you will need and plan for a couple casualties.
After you've finished piping all the shapes, carefully move the wax paper to a cookie sheet and chill the chocolate until it is solid. Carefully remove the chocolate shapes one at a time by peeling the wax paper out from underneath. Finally, prop them on your cupcakes!
I love the final look!
These creepcakes will be a scream at Halloween gatherings!
If you want an idea that's even more quick, printed DoodleBats can make great cupcake toppers with some markers, a toothpick and a little tape or glue.
These were made with DB Circles - Halloween and the tombstone on the right was made with SNF Dagger.
I love these little pirate flags. All three of them are in DB Pirate (the sneak peek product for this month).
The creepy printed decor can work as a cupcake wrapper, too. You can make your own with fonts and DoodleBats (the one below features LD Jambalaya) or LetteringDelights.com has a lot of pre-made cupcake wrappers to choose from.
Whatever you do, make it fun, make it crafty, and make yourself a Happy Halloween!
Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.
These Creepcakes are surprisingly easy with the help of some DoodleBats from ScrapNfonts and some chocolate. Yumm.Here's what you need to get started: Wax paper, chocolate chips (or better yet, chocolate almond bark if you have it), a ziplock baggie, and a printout of DoodleBats.
In selecting DoodleBats for your printout, make sure you pick images that are solid black with no separate parts. Scale them big enough so they're about two inches tall when printed out. DoodleBats with a lot of good images are DB Boo Ya and DB Haunted House. I also used DB Vintage Halloween.
You can also use any of the Jack-o-Pattern DoodleBats if you remember to use the negative of the image as your template. It helps me to draw a circle around the outside of the image, then I use the white shape as my guide.
I used chocolate chips, but on a hot day the chocolate may not set firmly. Chocolate almond bark would probably work better.
Melt the chocolate. I just did mine in the microwave for 20-30 second intervals, stirring in between just until it was smooth. You don't need very much chocolate, I used about half a cup and had extra. A little goes a long way.
Spoon the melted chocolate into the corner of the ziplock baggie. Try to gently deflate some of the air out of the back before you zip it shut.
Take a sheet of wax paper and lay it over your DoodleBat printout. You should be able to see the DoodleBats underneath it. Now carefully snip a tiny piece of the corner off of the ziplock baggie. If it seems too small a hole, you can always cut more. Hold the baggie like a frosting piping bag, and carefully trace the DoodleBat images in chocolate.I always like to outline the edges first, then fill them in with chocolate.
Make sure the images you are making in chocolate are thick enough to stand on their own. I went over some of my more fragile looking chocolate lines twice just to make sure they were thick enough.
I really liked the skulls, the spider web, and that funky spooky tree, so I made multiple copies of them by shifting my DoodleBat printout underneath the wax paper.
Make more copies than you think you will need and plan for a couple casualties.After you've finished piping all the shapes, carefully move the wax paper to a cookie sheet and chill the chocolate until it is solid. Carefully remove the chocolate shapes one at a time by peeling the wax paper out from underneath. Finally, prop them on your cupcakes!
I love the final look!
These creepcakes will be a scream at Halloween gatherings!If you want an idea that's even more quick, printed DoodleBats can make great cupcake toppers with some markers, a toothpick and a little tape or glue.
These were made with DB Circles - Halloween and the tombstone on the right was made with SNF Dagger.
I love these little pirate flags. All three of them are in DB Pirate (the sneak peek product for this month).
The creepy printed decor can work as a cupcake wrapper, too. You can make your own with fonts and DoodleBats (the one below features LD Jambalaya) or LetteringDelights.com has a lot of pre-made cupcake wrappers to choose from.
Whatever you do, make it fun, make it crafty, and make yourself a Happy Halloween!Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.
Thursday, August 4, 2011
I have a new obsession. I can't stop myself from making t-shirts with iron-on transfers.
What sparked this obsession you may wonder? It was the discovery of iron-on transfer paper that I can print out from my own printer!
If you haven't used this, you may be as skeptical as I was when I first saw it. Psh, that won't last through one wash! It will peel and crack and look TACKY. That's what I used to think. I'm here to tell you if you do it right, it will last and can look awesome.
My first shirt was for my husband who wanted a shirt to honor his favorite basketball player. He wears it all. the. time. We've washed it over and over and it still looks great (and feels softer with each wash).
Making a shirt
I decided I wanted St. Patrick's Day shirts that we could wear past St. Patrick's Day, too. That is where this tutorial begins. Enter SNF Jolly Curls, SNF Sophia and DB Lucky Trinket in fun, lucky designs.
First rule: before you print your design onto the transfer paper, make it a mirror image because you will be ironing it face down. Most design programs will let you do this or your printer may have a reverse or mirror image setting.
Next, cut out your image with a narrow margin around it. Try to keep corners rounded.
Here is when the nit-picky details make a difference. First, drain all the water from your iron and let it heat up for 5 minutes to evaporate any moisture. Don't take out your ironing boards. These transfers need a hard flat surface that can trap the heat between the iron and the surface. The instructions recommend veneer or laminate countertops covered by a pillowcase. I can do that.
Iron the pillowcase and your shirt (or fabric if your not doing a shirt) to make sure they are flat and free from moisture.
Then place your image face down how you want it on your fabric.
Push hard on your iron, with two hands, and slowly move the iron back and forth, up and down over your paper. Pay close attention to the edges. Make sure they get lots of heat and pressure. It should take 1-2 full minutes of slow pressured ironing to make sure you've got it.
Let your shirt cool for about two minutes and then carefully peel back the paper and reveal your creation! This is the exciting part.
Woo Hoo! It worked! (I haven't had it fail on me yet, but it's still exciting every time it works.)
I'm pretty pleased with my two St. Patty's shirts. If you like these designs, you can find slightly scaled down versions in this collection of Lucky Word Art at SNF.
Just so you know I'm not just making this obsession up, here is a sampling of some of the shirts I've made in the past few months.
I've burned through at least two packages of transfer paper. Good luck, and beware. It's funner to make these than you may think, and oh so easy.
Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.
What sparked this obsession you may wonder? It was the discovery of iron-on transfer paper that I can print out from my own printer!
If you haven't used this, you may be as skeptical as I was when I first saw it. Psh, that won't last through one wash! It will peel and crack and look TACKY. That's what I used to think. I'm here to tell you if you do it right, it will last and can look awesome.My first shirt was for my husband who wanted a shirt to honor his favorite basketball player. He wears it all. the. time. We've washed it over and over and it still looks great (and feels softer with each wash).
Making a shirt
I decided I wanted St. Patrick's Day shirts that we could wear past St. Patrick's Day, too. That is where this tutorial begins. Enter SNF Jolly Curls, SNF Sophia and DB Lucky Trinket in fun, lucky designs.
First rule: before you print your design onto the transfer paper, make it a mirror image because you will be ironing it face down. Most design programs will let you do this or your printer may have a reverse or mirror image setting.Next, cut out your image with a narrow margin around it. Try to keep corners rounded.
Here is when the nit-picky details make a difference. First, drain all the water from your iron and let it heat up for 5 minutes to evaporate any moisture. Don't take out your ironing boards. These transfers need a hard flat surface that can trap the heat between the iron and the surface. The instructions recommend veneer or laminate countertops covered by a pillowcase. I can do that.
Iron the pillowcase and your shirt (or fabric if your not doing a shirt) to make sure they are flat and free from moisture.Then place your image face down how you want it on your fabric.
Push hard on your iron, with two hands, and slowly move the iron back and forth, up and down over your paper. Pay close attention to the edges. Make sure they get lots of heat and pressure. It should take 1-2 full minutes of slow pressured ironing to make sure you've got it.
Let your shirt cool for about two minutes and then carefully peel back the paper and reveal your creation! This is the exciting part.
Woo Hoo! It worked! (I haven't had it fail on me yet, but it's still exciting every time it works.)I'm pretty pleased with my two St. Patty's shirts. If you like these designs, you can find slightly scaled down versions in this collection of Lucky Word Art at SNF.
Just so you know I'm not just making this obsession up, here is a sampling of some of the shirts I've made in the past few months.
I've burned through at least two packages of transfer paper. Good luck, and beware. It's funner to make these than you may think, and oh so easy.Shop ScrapNfonts.com for the widest variety of craft and scrapbooking fonts, DoodleBats, WordArt and Brushes.
Monday, August 1, 2011
Hand-drawn lettering, hatchings, scribbles and doodles are fun styles of lettering that are super popular. These playful elements add a youthful feel, you've probably noticed them lately in advertisements, catalogs and magazines. Capture the same look on your scrapbooking, card and paper crafting projects with a new bundle of sketch fonts designed exclusively for scrapNfonts by Brian Tippetts!
This month, Brian highlights the new Sketchbook Bundle with project samples and a free download. PS- You can buy the Sketchbook Bundle here for only $10.
______________________________________________________
Font Tip: Let's Play
by Brian Tippetts
In my March tip I talked about many different font styles and ways to find your own font style. In addition, I showed samples in each style to help you get started.
In this tip I am very excited to focus on a new bundle of fonts that fall in the “playful and display” style of fonts. The fonts are all included in the Sketchbook Bundle and are available now at ScrapNfonts.
This “sketch” style of font is very popular now. In fact, just the other day I received two catalogs in the mail that were both using this style of font. This fun, sketchy style is being used to add a fun and youthful feel. The same look and feel is now available for you to use on your scrapbooking, card or papercrafting project.
Included in the Sketchbook Bundle are four different fonts and one DoodleBat font, providing a great opportunity for mix and matching of fonts within the family.
There are many ways to mix and match fonts from the same style or font family. In this case, these fonts all have the “sketch” style and can be mixed together easily. I have created a few different samples of cards and invitations to show you how these fonts could be used.
In this first sample, I wanted the design to be simple and youthful. I used an “I” and “U” from SNF Sketch Block and the heart from DB Doodle Sketch. You can see how they can look identical, yet a great way to mix in some DoodleBats into your message. Then I used SNF Sketch Black Out for the text below. Oh, I almost forgot, the photo corners come from the DB Doodle Sketch too.
To create an invitation for an upcoming family picnic, I wanted to create a fun, graphic look. By using SNF Sketch Black Out for the large letters to create “Summer 2010 Picnic” and then the rocks at the bottom, the sketched letters are easy to see and very fun. For the message to attend and the date, time and location, I used SNF Sketchy in all caps. I used “earthy” colors to tie the whole design together and it looks great.
For this card, I wanted to see if I could add my own touch to the fonts. I used SNF Sketchy for the title, then used the same heart as the first sample from DB Doodle Sketch. To customize it, I drew the wings in Adobe Illustrator to add to the heart to go along with the saying. It turned out perfect. I’m guessing that you would love to have the “winged heart” for you own use. Well, you’re in luck, I have included the “winged heart” as part of a fun, free download.
Well, I hope you are excited as much as I am about this new “sketch” collection of fonts. As you can see from this layout by Merrilynne Harrington, they are a blast to use and really add a touch of playfulness to any scrapbook, card or papercrafting project.
This month, Brian highlights the new Sketchbook Bundle with project samples and a free download. PS- You can buy the Sketchbook Bundle here for only $10.
______________________________________________________
Font Tip: Let's Playby Brian Tippetts
In my March tip I talked about many different font styles and ways to find your own font style. In addition, I showed samples in each style to help you get started.
In this tip I am very excited to focus on a new bundle of fonts that fall in the “playful and display” style of fonts. The fonts are all included in the Sketchbook Bundle and are available now at ScrapNfonts.
This “sketch” style of font is very popular now. In fact, just the other day I received two catalogs in the mail that were both using this style of font. This fun, sketchy style is being used to add a fun and youthful feel. The same look and feel is now available for you to use on your scrapbooking, card or papercrafting project.
Included in the Sketchbook Bundle are four different fonts and one DoodleBat font, providing a great opportunity for mix and matching of fonts within the family.
There are many ways to mix and match fonts from the same style or font family. In this case, these fonts all have the “sketch” style and can be mixed together easily. I have created a few different samples of cards and invitations to show you how these fonts could be used.
In this first sample, I wanted the design to be simple and youthful. I used an “I” and “U” from SNF Sketch Block and the heart from DB Doodle Sketch. You can see how they can look identical, yet a great way to mix in some DoodleBats into your message. Then I used SNF Sketch Black Out for the text below. Oh, I almost forgot, the photo corners come from the DB Doodle Sketch too.
To create an invitation for an upcoming family picnic, I wanted to create a fun, graphic look. By using SNF Sketch Black Out for the large letters to create “Summer 2010 Picnic” and then the rocks at the bottom, the sketched letters are easy to see and very fun. For the message to attend and the date, time and location, I used SNF Sketchy in all caps. I used “earthy” colors to tie the whole design together and it looks great.
For this card, I wanted to see if I could add my own touch to the fonts. I used SNF Sketchy for the title, then used the same heart as the first sample from DB Doodle Sketch. To customize it, I drew the wings in Adobe Illustrator to add to the heart to go along with the saying. It turned out perfect. I’m guessing that you would love to have the “winged heart” for you own use. Well, you’re in luck, I have included the “winged heart” as part of a fun, free download.
Well, I hope you are excited as much as I am about this new “sketch” collection of fonts. As you can see from this layout by Merrilynne Harrington, they are a blast to use and really add a touch of playfulness to any scrapbook, card or papercrafting project. 
Enjoy these playful fonts and please find someone to send a “winged heart” to.
Oh, and PS- Show me the projects you come up with using these new sketch fonts by sharing them in our Idea Gallery.
Oh, and PS- Show me the projects you come up with using these new sketch fonts by sharing them in our Idea Gallery.
Brian
Subscribe to:
Posts (Atom)